Quadro SW-Version 4.1.x Guía de instalación Pagina 11

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 106
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 10
QuadroISDN Manual II: Administrator's Guide Administrator’s Menus
QuadroISDN; SW Version 4.1.x 11
General Information
The General Information page includes the following
information:
Uptime duration - Period Quadro is on since last
reboot.
Device hostname - Quadro device host name.
Quadro Operating System - Quadro operating system
version.
Application Software - Software and file system
versions of the Quadro.
Boot Loader - Quadro boot loader version.
DSP Software - Quadro DSP software version and the
date of build.
Preinstalled Languages – this field is present only
when multiple languages are preinstalled on the device
and it indicates the system default languages.
Language Pack – this field is present only when the
custom language pack is uploaded and it indicates the
version.
Fig. II-10: Quadro Status - General Information page
Network Status
The Network Status page includes the following information
about Interfaces:
Interface Name lists the Network interfaces available on the
Quadro (LAN and WAN).
IP Address lists the IP addresses corresponding to each
network interface.
Subnet Mask lists the subnet masks corresponding to each
network interface.
Properties will list the MAC address corresponding to each
network interface on the Quadro.
Monitor includes links to survey LAN and WAN traffic
correspondingly. The selection of these links will open a new
window with a table of network traffic statistics on the
following selected interfaces:
Received Bytes
Received Packets
Received Errors
Received Drop Errors
Received Overrun Errors
Received MultiCast
Packets
Transmitted Bytes
Transmitted Packets
Transmitted Errors
Transmitted Drop
Errors
Transmitted Carrier
Errors
Transmitted Collisions
Fig. II-11: Quadro Status Network Status page
When opening the corresponding interface statistics window, no traffic values are displayed at first. After opening the window, the tables will serve as
a counter and traffic statistics will be updated every minute.
DNS Server, Alternative DNS Server and Default Gateway - these display the Quadro settings corresponding to what has been configured with
the
System Configuration Wizard.
Services (NTP Server and Client, DHCP Server and Client, DNS, Firewall, NAT, PPP) statuses: shows if they have stopped or if they are still
running.
The View VPN Status link refers to the
VPN Configuration page where all VPN (IPSec, PPTP and L2TP) connections can be viewed and edited.
Vista de pagina 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 105 106

Comentarios a estos manuales

Sin comentarios