Quadro SW-Version 4.1.x Guía de instalación Pagina 10
- Pagina / 106
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
QuadroISDN Manual II: Administrator's Guide Administrator’s Menus
QuadroISDN; SW Version 4.1.x 10
The Min Data Rate text field requires the amount of upstream bandwidth that ought to remain for data applications even if voice applications use the
entire available upstream bandwidth. The value selected here needs to be smaller than the upstream bandwidth and is measured in kbit/s.
The WAN IP Configuration page is only displayed if Ethernet or
PPTP has been selected to be the uplink protocol. It offers the
following components:
The Assign automatically via DHCP radio-button selection
switches to automatic retrieval of the WAN IP address from a DHCP
server at the ISP/uplink.
Please Note: DHCP referred to here is the one that runs on the
provider’s side and not the Quadro’s personal DHCP server.
The Assign Manually radio-button switches to the manual
adjustment of IP settings. This selection requests the following
parameters:
IP Address requires the IP address for the Quadro WAN interface.
Subnet Mask requires the subnet mask for the Quadro device
WAN interface.
Default Gateway requires the IP address of the router where all
packets are to be sent to, for example, to the router of the provider.
Fig. II-8: Internet Configuration Wizard - WAN IP Configuration page
The WAN Interface Configuration page may be used to modify
the MAC address of the Quadro. This might be necessary if the ISP
(Internet Service Provider) requires a specified MAC address, for
example, for authentication. This page offers the following
components:
MAC Address Assignment manipulation radio-buttons:
• This Device turns to the default MAC address of the Quadro.
• User Defined requires user defined MAC Address.
The MTU drop down list allows you to select the maximum packet
size on the Ethernet (in bytes). MTU is used to fragment the
packets before transmitting them to the network. The MTU preferred
value is dependent on the Ethernet connection. The default MTU
size is 1500 Bytes for Ethernet and 1400 Bytes for PPPoE.
Fig. II-9: Internet Configuration Wizard - WAN MAC Address Configuration page
Status
The system status window displays non-editable tables providing extensive system status information about Quadro: General Information, Network
Status, Lines Status, Memory Status, Hardware Status and SIP Registration Status. The links on this page lead to device Transfer Statistics, user
mailboxes and supplementary services configuration pages.
The System Status page has several tables providing system information.
- Table of Contents 2
- Quadro’s Graphical Interface 5
- Administrator’s Menus 7
- General Information 11
- Network Status 11
- Lines Status 13
- Memory Status 13
- IP Routing Configuration 14
- Configuration Management 16
- Automatic Firmware Update 18
- Time/Date Settings 23
- Mail Settings 23
- All voice mails 24
- Networking Tools 25
- SNMP Settings 26
- User Rights Management 28
- Users Menu 30
- Extensions Management 30
- User Extension Settings 32
- Attendant Extension Settings 33
- Extension Codecs 36
- Authorized Phones Database 37
- Call Back Services 38
- Telephony Menu 40
- Call Statistics 40
- SIP Settings 42
- ISDN Settings 47
- Fig. II-87: MSN Service page 48
- • on call acceptance 50
- • Daily 57
- Best Matching Algorithm 59
- VoIP Carrier Wizard 62
- RADIUS Client Settings 63
- Voice Mail Common Settings 65
- Dial Plan Settings 65
- Hold Music Settings 65
- Advanced PPP Settings 66
- VPN Configuration 67
- Firewall and NAT 75
- Filtering Rules 75
- Service Pool 77
- IP Pool 78
- LAN Services Menu 80
- DNS Settings 80
- DNS Server Settings 80
- Registration Form 82
- Extension User's Menus 83
- Voice Mailbox 84
- Voice Mail Settings 85
- Group List 88
- Fig. III-10 Add Address page 89
- Your Extension 90
- It contains three 90
- Account Settings 91
- Incoming Call Blocking 93
- Outgoing Call Blocking 94
- Call Hunting 94
- Enter Voice Mail Services 96
- Review System Messages 97
- Services for Incoming Calls 97
- Administrator Settings 101
- (Blocked for all) 103
- Extension Settings 104
Relacionado con productos y manuales para Sistemas premisa branch exchange (pbx) Quadro SW-Version 4.1.x
(20 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.028 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales