Quadro SW-Version 4.1.x Manual de usuario descargar pdf (Pagina 15)

QCM Installation Guide Configuring Lines on the QCM

Step 2.3: QCM Configuration as a Quadro Remote Extension

Once an extension is configured on the Quadro, you may continue the QCM setup with the Fast

Configuration Wizard.

PAGE 1 – APPLICATION USAGE SCENARIO

Figure 10 QCM fast configuration wizard: Application usage scenario page

Select the Receptionist as

a remote extension of the

Quadro checkbox and click

on Next to continue.

PAGE 2 – LINE REGISTRATION SETTINGS

Specify the following settings and

Click on Next to continue:

Figure 11 QCM fast configuration wizard: Line registration settings page

• The User name and the

Password are identification

parameters required for

registration on the Quadro.

Please Note: These settings

must match the Username

and the Password specified

on the Quadro (see Step 2.1

• The Register on Quadro text

fields require the IP address of

the WAN interface of the

Quadro and its SIP UDP port.

Quadro Communications Manager (SW Version 4.1.x)

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Sin comentarios

Quadro SW-Version 4.1.x Manual de usuario Pagina 15