Quadro Quadro2x2 Guía de instalación descargar pdf (Pagina 6)

QuadroM 32x/8L/26x/12Li/26xi Manual I: Installation Guide About This Installation Guide

About This Installation Guide

This Installation Guide explains the installation of the QuadroM IP PBX. It gives step-by-

step instructions to provision the QuadroM and configure the phone extensions. After suc-

cessfully configuring the Quadro, a user will be able to make SIP and local PBX calls, as

well as calls to the PSTN and access the Internet from devices connected to the LAN.

• QuadroM8L offers 8 phone line (FXO), 2 phone extensions (FXS), 1 Ethernet WAN

port and 1 Ehernet LAN port

• QuadroM26x offers 8 phone line (FXO), 26 phone extensions (FXS), 1 Ethernet WAN

port and 1 Ehernet LAN port

• QuadroM12Li supports 6 phone line (ISDN), 2 phone extensions (FXS), 1 Ethernet

WAN port and 1 Ethernet LAN port

• QuadroM26xi supports 6 phone line (ISDN), 26 phone extensions (FXS), 1 Ethernet

WAN port and 1 Ethernet LAN port

• QuadroM32x offers one phone line (E1/T1), 2 phone extensions (FXS), 1 Ehernet

WAN port, 1 Ethernet LAN port and 1 ETH port.

This Installation Guide does not provide advanced configuration information. For these fea-

tures, refer to the Administrator's and Extension User's Guides.

Step 1: Installing the Quadro

explains the connection of cables and devices to the Qua-

dro.

Step 2: Configuring the Quadro

describes the configuration steps necessary to integrate

the Quadro into your network environment.

Step 2-A: Using IP Lines

explains how to configure IP lines on the QuadroM IP PBX and

to connect IP phones.

Step 2-B: Using Receptionist

refers to the document describing Receptionist’s configura-

tion on the Quadro.

Step 2-C: Using ISDN Lines

explains how to configure ISDN trunks and to define a de-

fault outgoing MSN.

Step 2-D: Configuring the E1/T1 Settings

describes the basic E1/T1 settings.

Step 3: Registering on Epygi’s Technical Support

shows you how to access the Epygi

Technical Support Center and the Epygi SIP Server.

Appendix: Changing the Admin Password

explains how to change the default administra-

tor password.

Appendix: Configuring NAT Traversal

explains configuration of the Quadro if it is placed

behind a NAT enabled router.

Appendix: Registering on Epygi’s SIP Server

explains how to register on Epygi's powerful

SIP server.

Appendix: Checking the Connections

gives hints on solving common problems.

QuadroM 32x/8L/26x/12Li/26xi; (SW Version 5.2.x) 6

1 2 3 4 5 6 7 8 9 10 11 ... 75 76

Comentarios a estos manuales

Sin comentarios

Quadro Quadro2x2 Guía de instalación Pagina 6

Comentarios a estos manuales

Relacionado con productos y manuales para Sistemas premisa branch exchange (pbx) Quadro Quadro2x2