Quadro Quadro2x2 Guía de instalación Pagina 34
- Pagina / 76
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
QuadroM 32x/8L/26x/12Li/26xi Manual I: Installation Guide Step 2: Configuring the Quadro
PPP/PPTP Configuration
Enter the IP address of the PPTP server into the PPTP Server text field.
Choose the encryption for the traffic over the PPTP interface from the Encryption drop
down list.
Authentication Settings require the Username and the Password used for the authentica-
tion on the ISP server.
Dial Behavior radio buttons:
• Dial Manually - if this radio button is activated, a button will be displayed in the main
management window that serves to switch the Internet connection on/off. When ac-
cessing the Internet, every station of the connected LAN has to connect to Quadro
first.
• Always connected - Quadro stays in the always connected mode. This will allow
Quadro always remain online in the network.
The IP Address Assignment field is used to specify the external IP address given to the
Quadro. Usually it is a dynamic address but in some cases you may be given a static IP
address.
Fig. I-39: PPP/PPTP Configuration page
If your ISP assigns a dynamic IP address, activate the Dynamic IP Address radio button,
otherwise activate the Fixed IP Address radio button and enter the IP address you were
assigned by your ISP.
Keep Connection alive checkbox enables keeping the connection alive by sending control
packets dedicated for the link state verification.
Click the Next button to display the WAN Interface Configuration page.
QuadroM 32x/8L/26x/12Li/26xi; (SW Version 5.2.x) 34
- Table of Contents 4
- Requirements 7
- Hardware Overview 8
- Networking Overview 13
- LAN/WAN Connection Options 14
- Connecting the Hardware 19
- Fig. I-27: Login page 26
- System Configuration 27
- Regional Settings 28
- Uplink Configuration 32
- WAN IP Configuration 33
- PPP/PPTP Configuration 34
- WAN Interface Configuration 35
- DNS Settings 35
- Step 2-A: Using IP Lines 37
- • Snom M3 • Aastra MBU400 41
- • .Telematrix IP 3300 41
- • .Telematrix IP9600 MWD5 41
- Step 2-B: Using Receptionist 42
- Step 2-C: Using ISDN Lines 42
- • on call acceptance 47
- Editing the E1/T1 Trunk 49
- Signaling Type CCS 50
- Signaling Type CAS 54
- Fig. I-63: Registration form 61
- • Symmetric NAT 71
- • Symmetric Firewall 71
- • Blocked UDP 71
Relacionado con productos y manuales para Sistemas premisa branch exchange (pbx) Quadro Quadro2x2
(2 paginas)
(9 paginas)Asoni CAM6803TIR-POE manuals
Owner’s manuals and user’s guides for Security cameras Asoni CAM6803TIR-POE.
We providing 1 pdf manuals Asoni CAM6803TIR-POE for download free by document types: Datasheet
Comentarios a estos manuales