Quadro Quadro16xi Guía de instalación descargar pdf (Pagina 38)

Quadro Manual II: Administrator's Guide Administrator’s Menus

Quadro2x, 2xi, Quadro4x, 4xi, Quadro16x, 16xi; (SW Version 5.2.x) 37

• QCM Support – allows Quadro’s extensions to be used by

Quadro Communication Manager after QCM trial period

expires. Depending on the feature key type, additional 4 or

10 QCM licenses can be activated on the Quadro.

• Autodialer Support - allows run with Quadro the Auto

Dialer application (the application description can be found

at Epygi Technical Support

• Call Recording – activates the feature which is used to

record PBX, SIP or PSTN calls on the Quadro and save

the recordings into the local recording box or upload to the

remote server. This Feature is enable only for Quadro 4x,

4xi; 16x, 16xi.

Fig. II-65: Features Add page

To receive a Feature Key, register the Quadro device and send a corresponding request to Epygi's Technical Support. This request must include the

Unique ID that is displayed in the Features page above the features list.

Upload Language Pack

The Upload Language Pack page allows you to upload a custom

language for GUI and Voice Messages of the Quadro. The

language of voice messages can be switched to the custom

Language Pack language from the GUI setting page in the System

Configuration Wizard

. The language of GUI session can be

changed to the custom Language Pack language from the radio

buttons on the login page.

Uploading a language pack will also change the language of some

supported IP phones (Aastra, snom v.6.x, Grandstream

GXP2000). After a custom Language Pack is uploaded onto the

system, reboot the IP phone to load a matching language onto the

phone.

Uploading a Language Pack will cause the loss of the following

data:

• All internally stored voice mail and custom voice messages

• Call statistics

• Pending events

• Transfer statistics

Fig. II-66: Upload Language Pack page

Please Note: Only one custom Language Pack can be uploaded at the time. Uploading a Language Pack will remove the existing one (if applicable)

and will reboot the Quadro. The Current Language Pack field displays read-only information about the custom language pack uploaded. When no

custom language pack is uploaded, the field indicates “unknown”.

Below, there is a Language Pack File to Upload text field that displays the selected image filename. The Browse button is used to browse the

custom language pack to be uploaded.

The Remove Current Language Pack link is only seen when a custom language pack is uploaded and is also used to remove it from the system.

The Custom languages for IP phones link is only seen when a custom language pack is uploaded and is used to move to the Update Languages

for IP Phones

page where a custom language pack may me uploaded to the IP phone.

Pressing Save will start uploading the custom language pack to the board.

Attention: Pressing the Save button will stop some vital processes on the Quadro, therefore you will need to reboot your device manually even if

you have cancelled the language pack update procedure on the following steps.

The next page displayed will show verification of the language pack being uploaded and asks for confirmation to overwrite the existing custom

language pack (if applicable). After final confirmation, the system will upload the selected custom Language Pack and it will reboot.

Update Languages for IP Phones

The Update Languages for IP Phones page is used to upload a custom language pack to the IP phone. This page only contains those IP phones

that support custom language pack uploading from the Quadro.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 149 150

Comentarios a estos manuales

Sin comentarios

Quadro Quadro16xi Guía de instalación Pagina 38

Comentarios a estos manuales

Relacionado con productos y manuales para Sistemas premisa branch exchange (pbx) Quadro Quadro16xi