Quadro Quadro16xi Guía de instalación descargar pdf (Pagina 112)

Quadro Manual II: Administrator's Guide Administrator’s Menus

Quadro2x, 2xi, Quadro4x, 4xi, Quadro16x, 16xi; (SW Version 5.2.x) 111

To insert the predefined tag to the subject line, you should simply click on the corresponding tag. The following format should be maintained to create

a flexible subject:

Example: Voice mail received from $[VM_DISPNAME] $[VM_DATE]

In this example, all email subjects will contain a static text "Voice mail received from" following by the display name of the caller and the date voice

mail is received.

FAX to E-mail format drop down list is used to define the format of the FAX document received in the voice mail and to be attached to the email, in

case user has enabled Send new voice messages via e-mail option from his personal Voice Mail Settings. TIFF or PDF formats may be selected

here.

Dial Plan Settings

The Dial Plan Settings page is used to adjust the dialing

timeout setting.

The Routing Dial Timeout setting specifies a period of time

after the last dialed digit that the system identifies as a

completion of dialing. If the user does not press any key

within the specified timeout, the system assumes that the

dialing is complete and starts calling the dialed number. Only

predefined values included in the drop-down list can be used

for this setting.

Fig. II-185: Dial Plan Settings page

The Routing Dial Timeout setting will also be applied to all the supported IP phones that are auto-configured with the Quadro and provide the

possibility of changing this setting through the auto-configuration file. The modified value of the setting will take effect after rebooting the IP phones.

3PCC Settings

The 3PCC Settings page is used to adjust the third party call

controlling settings. 3PCC service on the Quadro allows call

controlling applications to remotely initiate and handle calls on

the Quadro and to subscribe for certain event notifications

from the Quadro.

This page consists of the following components:

The Secure Connection checkbox is used enable a secure

encrypted connection between the call controlling application

and the Quadro.

Please Note: For successful connection, this option should

be set up in the same way on both sides (enabled or disabled

on both sides).

Fig. II-186: 3PCC Settings page

The Request Timeout text field requires the timeout (in seconds) during which the Quadro should receive a response to the request from the call

controlling application. If the response is not received during this timeout, Quadro will perform a request dependent default action. For example, if the

call controlling application is configured to handle incoming calls on the Quadro. Once the incoming call occurs, Quadro is trying to transfer the call to

the call controlling application. If the call controlling application does not response within the mentioned timeout, Quadro will answer the call or

perform an action configured for unanswered incoming calls. This setting is dependent on the network conditions therefore consult with your network

administrator before changing the default value.

The read-only Feature Key text field indicates whether the feature key for the 3PCC Support is installed on the system. The system will not accept

connections from 3PCC applications if no key is found. The 3PCC support is an optional feature and can be activated with a feature key from the

Features

page.

The read-only WAN Port text field indicates whether there is a filtering rule specified for the Call Control Access

. If a third-party call control

application connects to the Quadro from the WAN interface, a filtering rule for the corresponding host should be created on the Call Control Access

page to allow the application a remote access. Creating a filtering rule is not required if the firewall is not setup on the Quadro. The field shows

Opened if there is at least one enabled filtering rule for the Call Control Access

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 149 150

Comentarios a estos manuales

Sin comentarios

Quadro Quadro16xi Guía de instalación Pagina 112

Comentarios a estos manuales

Relacionado con productos y manuales para Sistemas premisa branch exchange (pbx) Quadro Quadro16xi