Quadro Quadro6L Guía de instalación descargar pdf (Pagina 6)

Quadro6L/4L/2x2 Manual I: Installation Guide About This Installation Guide

Quadro6L/4L/2x2; (SW Version 5.3.x and higher) 6

About This Installation Guide

This Installation Guide explains the installation of the Quadro IP PBXs of Quadro6L, Qua-

dro4L and Quadro2x2 series.

• Quadro6L offers 6 phone lines (FXO), 1 Ethernet LAN port and 1 Ethernet WAN

port as external interfaces.

• Quadro4L offers 4 phone lines (FXO), 2 phone extensions (FXS), 1 Ethernet LAN

port and 1 Ethernet WAN port as external interfaces.

• Quadro2x2 offers 2 phone lines (FXO), 2 phone extensions (FXS), 1 Ethernet LAN

port and 1 Ethernet WAN port as external interfaces.

This Installation Guide gives step-by-step instructions to provision the Quadro and confi-

gure the phone extensions with the Epygi SIP Server. After successfully configuring the

Quadro, a user will be able to make SIP phone calls to remote Quadro devices, make local

calls to the PSTN and access the Internet from devices connected to the LAN.

This Installation Guide neither describes the PBX, Auto Attendant, Call Relay, and Voice

Mail features of the Quadro nor does it provide advanced firewall and VPN configuration in-

formation. For these features, refer to the Administrator's and Extension User's Guides.

Step 1: Installing the Quadro explains the connection of cables and devices to the Qua-

dro.

XStep 2: Configuring the Quadro describes the configuration steps necessary to integrate

the Quadro into your network environment.

XStep 2-A: Using IP Lines explains how to configure IP lines on the Quadro IP PBX and to

connect IP phones to become functional in the Quadro’s LAN.

Step 2-B: Using Key System Emulation explains how to configure SLA lines.

Step 2-C: Using Receptionist refers to the document describing Receptionist’s configura-

tion on the Quadro.

Step 3: Registering on Epygi’s Technical Support shows you how to access the Epygi

Technical Support Center and the Epygi SIP Server.

Step 4: Making/Receiving CallsX explains how to enable the Quadro’s various telephony

features.

Appendix: Changing the Admin Password explains how to change the default administra-

tor password.

Appendix: Configuring NAT Traversal explains configuration of the Quadro if it is placed

behind a NAT enabled router.

Appendix: Registering on Epygi’s SIP ServerX explains how to register on Epygi's powerful

SIP server.

Appendix: Checking the Connections gives hints on solving common problems.

1 2 3 4 5 6 7 8 9 10 11 ... 56 57

Sin comentarios

Quadro Quadro6L Guía de instalación Pagina 6