Quadro Quadro4L Guía de instalación descargar pdf (Pagina 12)

Quadro6L/4L Manual I: Installation Guide Step 1: Installing the Quadro

LAN/WAN Connection Options

• A Quadro6L with an Ethernet WAN port behind a router, which is connected

to a cable or xDSL modem. IP phones are placed on the WAN side of the

Quadro6L.

Fig. l- 4: Configuration: Quadro6L behind a router with IP phones on WAN

• A Quadro4L with an Ethernet WAN port behind a router, which is connected

to a cable or xDSL modem. IP phones are placed on the WAN side of the

Quadro4L.

Fig. l- 5: Configuration: Quadro4L behind a router with IP phones on WAN

In this and the following configuration (Fig. I -4, Fig. I -5, Fig. I -6 and Fig. I -7), the IP router

typically acts as a DHCP server for the LAN and assigns the IP addresses to the PCs and

other devices. The Quadro can be connected through its WAN port directly to one of the

router's LAN ports and will get an IP address from the router. By default, the Quadro acts

as a DHCP client on the WAN port. The IP phones are placed on the WAN side of the

Quadro6L, connected to the company LAN.

The Admin PC can be connected to the Quadro WAN or LAN port to access the Web Man-

Quadro6L/4L; (SW Version 5.2.x) 12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 56 57

Sin comentarios

Quadro Quadro4L Guía de instalación Pagina 12